Surface Metal Mine specialising in Sand, Industrial NEC, operated by Q&D Construction
From Dayton, NV, drive 4.4 miles east of the intersection of US 50 and Dayton Valley Road. Turn left (north)at the rock pillars and continue0.08 miles to the mine location
Id | 2602810 |
Current Mine Name | Dayton Aggregate |
Coal Metal Ind | M |
Current Mine Type | Surface |
Current Mine Status | Active |
Current Status Dt | 03/20/2017 |
Current Controller Id | 0132121 |
Current Controller Name | Christopher Dianda; Michael Dianda |
Current Operator Id | 0150055 |
Current Operator Name | Q&D Construction |
State | NV |
Bom State Cd | 26 |
Fips Cnty Cd | 019 |
Fips Cnty Nm | Lyon |
Cong Dist Cd | |
Company Type | Corporation |
Current Controller Begin Dt | 03/16/2017 |
District | M7 |
Office Cd | M7841 |
Office Name | Henderson NV Field Office |
Assess Ctrl No | |
Primary Sic Cd | 144600 |
Primary Sic | Sand, Industrial NEC |
Primary Sic Cd 1 | 1446 |
Primary Sic Cd Sfx | 00 |
Secondary Sic Cd | |
Secondary Sic | |
Secondary Sic Cd 1 | |
Secondary Sic Cd Sfx | |
Primary Canvass Cd | 7 |
Primary Canvass | Nonmetal |
Secondary Canvass Cd | |
Secondary Canvass | |
Current 103i | Never Had 103I Status |
Current 103i Dt | |
Portable Operation | Y |
Portable Fips St Cd | 32 |
Days Per Week | 5 |
Hours Per Shift | 9 |
Prod Shifts Per Day | 1 |
Maint Shifts Per Day | 0 |
No Employees | 2 |
Part48 Training | Y |
Longitude | |
Latitude | |
Avg Mine Height | |
Mine Gas Category Cd | |
Methane Liberation | |
No Producing Pits | |
No Nonproducing Pits | |
No Tailing Ponds | 0 |
Pillar Recovery Used | N |
Highwall Miner Used | N |
Multiple Pits | N |
Miners Rep Ind | N |
Safety Committee Ind | N |
Miles From Office | 52 |
Directions To Mine | From Dayton, NV, drive 4.4 miles east of the intersection of US 50 and Dayton Valley Road. Turn left (north)at the rock pillars and continue0.08 miles to the mine location |
Nearest Town | Dayton |
Leave your comments, questions and feedback on this mine below. You can also include up to date contact information and correct any listing errors or omissions.