Surface Metal Mine specialising in Construction Sand and Gravel, operated by McINTYRE LOAM INCORPORATED
RT 146 SOUTH TO RT 16 WEST IN UXBRIDGE GO ABOUT 1 MILE TAKE RIGHT ON WEST ST GO TO END TAKE LEFT ON W. HARTFORD AVE PIT 1 MILE ON LEFT
Id | 1901122 |
Current Mine Name | WALNUT GROVE PIT |
Coal Metal Ind | M |
Current Mine Type | Surface |
Current Mine Status | Intermittent |
Current Status Dt | 03/11/2003 |
Current Controller Id | M08673 |
Current Controller Name | Thomas McIntyre |
Current Operator Id | 0051183 |
Current Operator Name | McINTYRE LOAM INCORPORATED |
State | MA |
Bom State Cd | 19 |
Fips Cnty Cd | 027 |
Fips Cnty Nm | Worcester |
Cong Dist Cd | |
Company Type | Corporation |
Current Controller Begin Dt | 03/10/2003 |
District | M2 |
Office Cd | M2861 |
Office Name | Manchester NH Field Office |
Assess Ctrl No | 000414306 |
Primary Sic Cd | 144200 |
Primary Sic | Construction Sand and Gravel |
Primary Sic Cd 1 | 1442 |
Primary Sic Cd Sfx | 00 |
Secondary Sic Cd | |
Secondary Sic | |
Secondary Sic Cd 1 | |
Secondary Sic Cd Sfx | |
Primary Canvass Cd | 5 |
Primary Canvass | SandAndGravel |
Secondary Canvass Cd | |
Secondary Canvass | |
Current 103i | Never Had 103I Status |
Current 103i Dt | |
Portable Operation | Y |
Portable Fips St Cd | 25 |
Days Per Week | 5 |
Hours Per Shift | 9 |
Prod Shifts Per Day | 1 |
Maint Shifts Per Day | 1 |
No Employees | 3 |
Part48 Training | Y |
Longitude | 71.696111 |
Latitude | 42.074842 |
Avg Mine Height | |
Mine Gas Category Cd | |
Methane Liberation | |
No Producing Pits | |
No Nonproducing Pits | |
No Tailing Ponds | 0 |
Pillar Recovery Used | N |
Highwall Miner Used | N |
Multiple Pits | N |
Miners Rep Ind | N |
Safety Committee Ind | N |
Miles From Office | 80 |
Directions To Mine | RT 146 SOUTH TO RT 16 WEST IN UXBRIDGE GO ABOUT 1 MILE TAKE RIGHT ON WEST ST GO TO END TAKE LEFT ON W. HARTFORD AVE PIT 1 MILE ON LEFT |
Nearest Town | UXBRIDGE |
Leave your comments, questions and feedback on this mine below. You can also include up to date contact information and correct any listing errors or omissions.